52
VQT2D01
Recording
Recording (Basic)
7
Recording with the video
light
The video light enables brightening of the images taken in a dimly-lit place.
¬Change the mode to .
≥ This function’s default setting is / .
≥ Auto video light will turn on/off in conjunction with Low Light mode in Intelligent auto mode.
≥ Using the video light reduces battery time.
≥ The subject should be within 1.2 m (4 feet) of the unit.
≥ Do not look directly into the light.
≥ Using the MagicPix function at the same time will make conditions even brighter.
≥ If you turn off the power or change the mode, the video light is turned off.
≥ Set the video light to off where using a light is prohibited.
Video light button
Each time the button is pressed, the
indication changes by one setting in the
following order.
# / # Setting canceled
: Always on.
/:
Turns on/off automatically according to
brightness of the surroundings.
≥ Lights up when the lens cover is
closed.
HDCSD10&TM10PP-VQT2D01_eng.book 52 ページ ２００９年５月１８日 月曜日 午前９時３６分
To Next Page
Loading...
