75
VQT2D01
Part that was recognized as clearly recorded is
extracted from a long recording, and it can be
played back in short time with music added.
1 Touch .
2 Touch [HIGHLIGHT].
3 Touch the desired item.
[SCENE SETUP]:
Select the scene or date to be played back.
[PLAYBACK TIME]:
Select the time to play back. (l 76)
[MUSIC SELECT]:
Select the music to be played on playback.
(l 76)
4 Touch [START].
≥ The playback time is displayed, and the unit is
put into playback pause.
5 Select the playback operation.
(l 70)
≥ When the playback is finished or stopped, the
screen to select [REPLAY], [SELECT AGAIN]
or [EXIT] is displayed.
Touch the desired item.
∫ Scene setting
1) Touch [SELECT SCENES] or
[SELECT DATE].
2) (When [SELECT SCENES] is selected)
Touch the scene to be played back.
≥ Up to 99 scenes can be selected in
succession.
≥ When touched, the scene is selected and is
displayed. Touch the scene again to cancel the
operation.
(When [SELECT DATE] is selected)
Touch the date to be played back.
≥ A maximum of 7 days can be selected.
≥ When touched, the date is selected and
surrounded by red.
Touch the date again to cancel the operation.
3) Touch [Enter]/[ENTER] to complete the
settings.
Highlight playback
HDCSD10&TM10PP-VQT2D01_eng.book 75 ページ ２００９年５月１８日 月曜日 午前９時３６分
To Next Page
Loading...
