72
VQT2D01
∫ Frame-by-frame playback
The motion picture is advanced one frame at a
time.
1 Pause the playback.
≥ When the operation icon disappears, touch
the screen to display the icon again.
2Touch .
(Touch to advance the frames one at a
time in the reverse direction.)
≥ Normal playback is restored when you touch
.
≥ When the frames are advanced one at a time
in the reverse direction, they will be shown in
intervals of 0.5 seconds.
∫ Direct playback
1Touch 1 to display the direct playback
bar.
2 Touch the direct playback bar A.
≥ The playback is paused and the image is
skipped until the position you touched.
≥ Playback starts again when you release the
touch screen.
≥ Touch 2 to display the operation icon.
≥ Sound will be heard only during normal
playback.
≥ If pause play is continued for 5 minutes, the
screen returns to the thumbnails.
≥ Any scenes where the thumbnails are
displayed as cannot be played back.
≥ The elapsed time for playback indication will be
reset to “0h00m00s” for each scene.
Motion picture compatibility
≥ This unit is based on the AVCHD format.
≥ The video signal that can be played back on
this unit is 1920k1080/60i, 1920k1080/24p
or 1440k1080/60i.
≥ This unit may degrade or not play back
motion pictures recorded or created on
other products, and other products may
degrade or not play back motion pictures
recorded on this unit, even if the products
support AVCHD.
HDCSD10&TM10PP-VQT2D01_eng.book 72 ページ ２００９年５月１８日 月曜日 午前９時３６分
To Next Page
Loading...
