To Next PageTo Next PageWhy does my Panasonic HDC-SD90 stop recording arbitrarily?
Your Panasonic camcorder might be stopping recording for several reasons: * Ensure you're using an SD card suitable for motion picture recording. * Format the SD card or built-in memory using the camcorder to address potential data writing speed issues. * If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
What to do if my Panasonic HDC-SD90 SD card is not recognized?
If your Panasonic camcorder isn't recognizing the SD card, make sure that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card/ SDXC Memory Card) that you inserted.
How to fix flickering LCD monitor on Panasonic Camcorder?
If the LCD monitor of your Panasonic camcorder flickers indoors, or if you notice color or brightness changes with horizontal bars in the image, set the camcorder to Intelligent Auto Mode in Motion Picture Recording Mode. Alternatively, manually set the shutter speed to 1/60 in areas with a 60 Hz power supply, or 1/100 in areas with a 50 Hz power supply.
How to fix the color balance on my Panasonic Camcorder when recording indoors?
If the color balance of your Panasonic camcorder images appears strange when recording indoors, such as in a gymnasium, try setting the white balance to Indoor mode 2. If the issue persists, switch to Manual adjustment mode.
Why does my Panasonic Camcorder turn off automatically?
Your Panasonic camcorder might be turning off automatically due to the VIERA Link function. If you're not using VIERA Link, disable it in the settings. Also, if the camcorder is connected to a DVD burner and the USB cable is removed while copying or playing back images, it will turn off automatically.
What to do if my Panasonic HDC-SD90 Camcorder displays 'ERROR OCCURRED'?
If your Panasonic camcorder displays the error message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”, restart the unit by turning it off and then on again. If the error message continues to appear after restarting, disconnect the power and contact consumer support for repairs.
What to do if my Panasonic HDC-SD90 cannot be operated?
If your Panasonic camcorder is on but not responding, try these steps: remove the battery or AC adapter, wait for about a minute, and then reconnect it. Wait another minute before turning the unit back on. If the issue persists, disconnect the power and contact customer support.
Why does my Panasonic HDC-SD90 battery run down so quickly?
There are several reasons why your Panasonic camcorder battery might be draining faster than expected. Ensure the battery is fully charged. Keep in mind that battery life is shorter in cold environments. The battery itself might be nearing the end of its lifespan and needs replacing if it still drains quickly after a full charge.
General| Filter size | 41.5 mm |
|---|---|
| Digital zoom | 1500 x |
| Optical zoom | 21 x |
| Image stabilizer | Yes |
| Focal length range | 2.82 - 59.2 mm |
| Focal length (35mm film equivalent) | 28 - 729 mm |
| Sensor type | MOS |
| Total megapixels | 3.32 MP |
| Optical sensor size | 1/4.1 \ |
| Effective megapixels (movie) | 2.61 MP |
| Interface | USB 2.0 |
| Video out | 1 |
| Power requirements | AC/DC, 3.6 - 5.0 V |
| Power consumption (typical) | 7.7 W |
| Display diagonal | 3 \ |
| Maximum video resolution | 1920 x 1080 pixels |
| Image formats supported | JPG |
| Still image resolution(s) | 2592 x 1944 |
| Audio system | Dolby Digital |
| Camera shutter speed | 1/25 - 1/8000 s |
| Shutter speed (photo) | 1/25 s |
| Shutter speed (video) | 1/8000 s |
| Minimum illumination | 1 lx |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Compatible memory cards | SD, SDHC, SDXC |
| Product color | Black, Grey |
| Bundled software | HD Writer AE 3.0 |
Weight and Dimensions| Depth | 118.5 mm |
|---|---|
| Width | 50.5 mm |
| Height | 63 mm |
| Weight | 244 g |
Important safety guidelines to follow before operating the unit.
Step-by-step instructions for installing and removing the battery.
Procedure for connecting the AC adapter and charging the battery.
Details on compatible SD card types and their specifications for recording.
Basic operation of touching the screen to select icons or pictures.
Guidance on holding the camera correctly for stable recording.
Functionality for high-quality zoom without picture degradation.
How to adjust the image stabilizer for different recording situations.
Automatically sets optimum shutter speeds and apertures for different scenes.
How to control motion picture playback using on-screen icons.
Steps to prepare for copying or playing back discs with a DVD burner.
Software for PC data transfer, editing, and management.
System requirements for installing and running HD Writer AE 3.0 software.
Icons and symbols displayed on the screen during recording.
Troubleshooting steps for power-related issues.
General cautions regarding the unit's use and environmental factors.
Factors that can cause condensation to form on the unit.
