104
VQT2W75
∫ To disconnect USB cable safely
1 Double click the icon in task tray displayed on the PC.
≥ Depending on your PC’s settings, this icon may not be displayed.
2 Select [USB Mass Storage Device] and click [Stop].
3 Verify [MATSHITA HDC-SDX1/SD USB Device] is selected and click [OK].
∫ Charging the battery by connecting it to different devices
When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
recorder or Panasonic DVD recorder, the battery will charge.
≥ When connecting this unit to a PC for the first time, make sure to connect this unit to
the PC with this unit turned on.
≥ Insert the USB cable securely all the way. It will not operate properly if it is not inserted all
the way.
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
≥ Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.
≥ During charging, the status indicator flashes. When charging is finished, the status
indicator turns off.
≥ You cannot charge when the status indicator flashes rapidly for approx. 1 minute, or when
it does not light at all. Charge using the AC adaptor. (l 13)
≥ It will take 2 or 3 times longer to charge compared to when using the AC adaptor.
≥ Use the AC adapter to charge the large capacity battery (VW-VBK360; optional).
≥ If the status indicator flashes at a particularly fast or slow rate, refer to page 125.
≥ When this unit is connected to a PC, Blu-ray disc recorder or DVD recorder using a USB
cable while the unit is turned on, power is also supplied from the connected equipment to
this unit.
HDC-SDX1GC-VQT2W75_mst.book 104 ページ ２０１０年６月２１日 月曜日 午後３時１２分
To Next Page
Loading...
