40
VQT2W75
Advanced
Recording
(Advanced)
2
Image stabilizer function
Use the image stabilizer to reduce the effects of shake during recording.
¬ Change the mode to or .
∫ Changing image stabilizer mode
(Motion picture recording mode)
When set to [ON], you can further improve image stabilization for recording while walking, or
holding the unit and recording a distant subject with zoom.
≥ This function’s default setting is [ON].
(Still picture recording mode)
[MODE1]:
The function works all the time.
[MODE2]:
The function works when the button is pressed. We recommend you are recording
yourself or recording with a tripod in still picture recording mode.
Optical image stabilizer button
Press the button to turn optical image
stabilizer on/off.
(Motion picture recording mode)
/ # OFF
≥ When [HYBRID O.I.S.] is [ON], is
displayed. When [OFF], is displayed.
≥ When recording with a tripod in motion picture
recording mode, we recommend that you set
to OFF.
(Still picture recording mode)
/ # OFF
≥ When [O.I.S.] is [MODE1], is displayed.
When [MODE2], is displayed.
: [RECORD SETUP] # [HYBRID O.I.S.] # [ON] or [OFF]
: [RECORD SETUP] # [O.I.S.] # [MODE1] or [MODE2]
HDC-SDX1GC-VQT2W75_mst.book 40 ページ ２０１０年６月２１日 月曜日 午後３時１２分
To Next Page
Loading...
