70
VQT2W75
If playback of a scene was stopped halfway, the playback can be resumed from where it was
stopped.
If playback of a motion picture is stopped, appears on the thumbnail view of the stopped
scene.
≥ The memorised resume position is cleared if you turn off the unit or change the mode. (The
setting of [RESUME PLAY] does not change.)
You can zoom in by touching a still picture during playback.
1 Touch the part you wish to zoom in on during still picture playback.
≥ The still picture is zoomed in on, centring on the part you touched. With each touch, you
zoom in further. (k1 # k2 # k4)
2 Touch / / / or drag the screen
(l 19) to move the zoomed position.
≥ The location of the zoom displays for about 1 second
when zooming in (zooming out) or moving the displayed
location.
≥ The more picture is enlarged, the more its quality
deteriorates.
Zooming out from the zoomed still picture
Touch to zoom out. (k4 # k2 # k1)
≥ Touch to return to normal playback (k1).
≥ You can also perform zoom operations using the zoom lever or the adjust zoom buttons.
Resuming the previous playback
: [VIDEO SETUP] # [RESUME PLAY] # [ON]
Zooming in on a still picture during playback (Playback
zoom)
A Displayed location of
the zoom
HDC-SDX1GC-VQT2W75_mst.book 70 ページ ２０１０年６月２１日 月曜日 午後３時１２分
To Next Page
Loading...
