Panasonic HDC-SDX1 - Connecting with a HDMI Mini Cable; Connecting with the AV Multi Cable

85
VQT2W75
Select the desired method of HDMI output.
≥ [AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080i] or [576p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
≥ When multiple scenes with different recording modes are played back among the MP4
scenes, the image may not display for a few seconds on the TV during the switching of
scenes.
AV multi connector output setting can be changed.
Changing the component output setting
Connecting with a HDMI mini cable
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080i]/[576p]
Connecting with the AV multi cable
: [SETUP] # [AV MULTI] # desired setting
[COMPONENT]: When connecting to the component terminal
[AV OUT]: When connecting to the video terminal
: [SETUP] # [COMPONENT OUT] # desired setting
[576i]: When connecting to the component terminal on the TV compatible with 576i.
(Playback is in standard quality.)
[1080i]: When connecting to the component terminal on the TV compatible with
1080i.
(Playback is in high definition quality.)
HDC-SDX1GC-VQT2W75_mst.book 85 ページ ２０１０年６月２１日 月曜日 午後３時１２分