66
VQT2W75
If auto focusing is difficult due to the conditions, then use manual focus.
≥ Change the mode to or .
≥ Press the iA/MANUAL button to switch to manual mode. (l 63)
1 (When MF assist function is used)
Select the menu.
≥ Touch to display the manual icon.
2 Touch [FOCUS].
3 Touch [MF] to change to
manual focus.
≥ MF appears on the screen.
4 Adjust the focus by touching
/.
A Part displayed in blue
The in-focus area is displayed in blue. The
normal screen returns approximately
2 seconds after you finish bringing the
subject into focus.
≥ When [MF ASSIST] is [OFF], the blue
area is not displayed.
≥ To restore auto focus, touch [AF] in step 3
or press the iA/MANUAL button again.
≥ The blue display does not appear on the
images actually recorded.
Manual focus adjustment
: [RECORD SETUP] #
[MF ASSIST] # [ON]
:To focus on a close subject
:To focus on a faraway subject
MF
F
MFMF
MF
MF
MF
IRISSHTRWB
FOCUS
HDC-SDX1GC-VQT2W75_mst.book 66 ページ 2010年6月21日 月曜日 午後3時12分