Chapter 1 Before Use
1-2
1
1-1 System Configuration
1-1-1 System Configuration
The system configuration and equipment connecting cables are shown below.
USB-RS-422/485 converter
Recommended: SI-35USB (LINEEYE made) or GT02 series or GT12 series
(Panasonic Industrial Devices SUNX made)
The user may use a different converter at the user's own discretion.
Dedicated software (to be downloaded from the website of Panasonic
Industrial Devices SUNX) is required if the GT02 or GT12 series is used
as a converter.
RS-485 wiring
can reach up to
16 units.
Sensor head
(Standard type)
Sensor head
(High-function
type)
Unilateral extension
cable connector
(2 m, 5 m, 10 m, and 20 m)
USB-RS-422/485 converter
PC
Setting and Monitoring
Software HL-G1SMI
USB cable
RS-422/485
Analog signal processing equipment
(A/D board and digital panel)
I /O control devices
(PLC etc.)
Analog output
Each I/O
System Configuration Example with Setting Tools (HL-G1SMI) Used
RS-422/485 communications
control equipment
RS-422/485 board
USB-RS-422/485 converter
Dedicated compact console
and others
To Next Page
Loading...
