Chapter 3 Function
3-6
3
Basic Operation
The following section explains how to operate the system in RUN mode after the
system is turned ON, make function changes in the system, and reset the system to
RUN mode, along with the shortcut functions of the system in RUN mode.
The operation of the system common to each function is explained below. For
more information on settings peculiar to the respective functions,
refer to
"3-3-2 Memory Change" through "3-3-9 System Settings."
Turn the power ON
(7) Initialization
Turn the power ON
+
+
+
2 s
2 s
(3) Zero set
(4) Reset
（
5
）
Threshold a
（
6
）
Threshold b
Short cut
2 s
(2
）
Setting mode
(1) RUN mode
(All LEDs lit)
To Next Page
Loading...
