Panasonic HL-G1 A-C5 Series - Judgment Output off Delay

Chapter 3 Function
3-25
3
 Judgment Output OFF Delay
This function delays the timing of switching ON to OFF of judgment output.
測
Setting Function Panel display
OFF
Output according to the sampling cycle.
2 ms
2-ms OFF-delay
4 ms
4-ms OFF-delay
10 ms
10-ms OFF-delay
20 ms
20-ms OFF-delay
40 ms
40-ms OFF-delay
100 ms
100-ms OFF-delay
Hold
Output once turned ON will be kept on
hold. The output kept on hold will be
released with reset input.
* indicates the default value.
Judgment output timing
The solid lines shows OFF setting actions. OFF timing will be delayed according
to the OFF-delay set time as shown by the dotted lines.
• If actual output is turned ON earlier than the OFF-delay set time, the OFF-delay
set time will be enabled from the point where the output is turned OFF.
• If "Logic" or "Independent" or "2-state" is selected with the judgment output
selection function, OUT3 (alarm output) will not be OFF-delayed regardless of
OFF-delay settings.
This function is useful for applying output to a control device when the
output is changing at high speed.
OUT2
ON
(OPEN)
OFF
OUT1
OUT3
OFF delay setting time
ON
(OPEN)
OFF
ON
(OPEN)
OFF