Chapter 3 Function
3-41
3
Eco Mode
This function turns OFF the LED indicators on the control panel while in
RUN mode for energy saving.
Setting Details Panel display
Eco-OFF
Eco Mode is OFF.
Eco-ON
Only LEDs on the digital display will be
turned OFF.
Eco-FULL
Other than LASER indicator, All the LEDs
will be turned OFF.
* indicates the default value.
Supplemental remarks
•
The display will be restored by switching while the LEDs are turned OFF while
the system is in eco mode. The LEDs will be turned OFF again if the system is
not operated for 20 seconds.
・
The LEDs will be always lit while the system is in setting mode.
● Setting Procedure
1
Display the "System Setting" screen
while the system is in setting mode.
2
Press the [ENTER] key. The "Timing
Mode" screen will be displayed.
3
Press the [DOWN] key twice. The eco
mode screen will be displayed.
4
Press the [ENTER] key. The present
mode setting will be displayed.
5
Press the [UP]/[DOWN] key to make
mode changes. (Example: Changing
the mode to Eco-FULL.)
6
Press the [ENTER] key to determine the
mode setting.
To Next Page
Loading...
