22 VQT3P01
2 Connect USB terminal of this unit to a PC with a USB
extension cord.
≥ Be sure to connect USB terminal of this unit to a PC with a USB
extension cord when charging the battery.
≥ Connect the USB extension cord by inserting it securely all the
way without forcing.
A USB extension cord (supplied)
B AC adaptor (optional)
≥ Do not use any other USB extension cords except the supplied one.
(Operation is not guaranteed with any other USB extension cords.)
≥
Insert the USB extension cord securely all the way. (Insert to the line
C
.)
It will not operate properly if it is not inserted all the way.
≥
(EB) Always use a genuine Panasonic AC adaptor (VSK0752; optional).
(EP) Always use a genuine Panasonic AC adaptor (VSK0751; optional).
(GC) Always use a genuine Panasonic AC adaptor
(
A
VSK0752/
B
VSK0751; optional).
A
Hong Kong Special Administrative Region of China and Saudi Arabia
B
Areas Other than Hong Kong Special Administrative Region of China,
Saudi Arabia
(GN) Always use a genuine Panasonic AC adaptor (VSK0753; optional).
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
The unit is in the standby condition when the AC adaptor is connected.
The primary circuit is always “live” as long as the AC adaptor is
connected to an electrical outlet.
≥ The status indicator will flash red at an interval of 2 seconds, indicating
that charging has begun.
≥ During charging, the status indicator flashes. When charging is
finished, the status indicator turns off.
HMTA20&TA2EB&EP&GC&GN-VQT3P01_mst.book 22 ページ ２０１１年４月２２日 金曜日 午後１時２５分
To Next Page
Loading...
