VQT3P01 23
∫ To return the USB terminal to its original position
≥
When pressing the USB terminal with your fingers, press slowly and carefully.
1 Press the USB Latch C.
2 While pressing on the USB Latch C, press the USB terminal with
your finger.
≥ Release your finger from the USB Latch C, and push in the USB
terminal until it is locked.
3 Close the USB terminal cover.
4 While the USB terminal cover is closed, slide the open/close lever for
the USB terminal cover B toward the direction of the arrow.
5 Slide the LOCK lever for the USB terminal cover A to lock the open/
close lever for the USB terminal cover B.
1
Slide the USB Latch
A
.
2
While the USB Latch
A
is slid, press the USB terminal with your finger.
≥ Release your finger from the USB Latch
A, and push in the USB
terminal until it is locked.
3 Close the USB terminal cover.
≥ Please refer to page 84 if the status indicator flashes quickly.
≥ Do not heat or expose to flame.
≥ Do not leave unit in an automobile exposed to direct sunlight for a long
period time with doors and windows closed.
≥ If the operating time is still too short even after the battery is fully
charged, the battery has worn out and needs to be replaced. Consult
the dealer who you purchased this unit from.
≥
Operation is not guaranteed for all devices equipped with a USB terminal.
HMTA20&TA2EB&EP&GC&GN-VQT3P01_mst.book 23 ページ ２０１１年４月２２日 金曜日 午後１時２５分
To Next Page
Loading...
