68 VQT3P24
ADVANCED OPERATION/SHOOTING
RECORDING MENU 2
To access and use the Menu Screen, see page 31 to 33.
Motion compensation (image stabiliser) setting
(page 37)
Your camera can minimize a jittery picture by compensating for unintentional
hand motion.
HINT
If the motion compensation does not seem to be working...
i Due to the mechanical characteristics of this function, it may not be
possible for the camera to compensate for violent motion.
i If the digital zoom (page 39) is being used, the large magnification factor
may make it difficult for the motion compensation function to work correctly.
i When the scene mode function is set to night portrait , low light ,
night scenery or fireworks , the motion compensation effect may
be insignificant.
i When the optical zoom is used or when the autofocus is operating, the
image may appear to waver, but this is not a malfunction.
When motion compensation is enabled,
i The following icons are shown on the LCD monitor:
001:00:05
1080-30
p
The video stabiliser is active
The photo stabiliser is active
Both the video stabiliser and the photo stabiliser are active
To Next Page
Loading...
