VQT3P24 81
ADVANCED OPERATION/PLAYBACK
File protect setting (page 40)
Prevent accidental erasure of image and audio files.
Protect files one by one
1 Display the file that you want to protect from accidental erasure, and
display the Playback Menu 1 (page 31).
2 Select [PROTECT] and press the SET button.
3 Select [PROTECT SINGLE] and
press the SET button.
h [LOCK] appears.
h If the protect mode has already
been enabled for the file, then
[UNLOCK] appears.
4 Select [LOCK] and press the SET
button.
h The protect mode is set for the
file.
h The protect mark indicates
that the file is locked.
HINT
i Even if the protect mode is set for certain files, they will be deleted if the
card is reformatted.
To select a different image in step 3...
i Toggle the SET button to the left or right.
To cancel the protect mode for a file...
i Display the desired file and repeat steps 1 to 3, select [UNLOCK], and
press the SET button. The protect mark will disappear and the protect
mode is cancelled.
SET
PROTECT
LOCK
RETURN
ENTER
To Next Page
Loading...
