Panasonic HX-DC10 - Playback; Playback Menu 1; Slideshow Settings

80 VQT3P24
ADVANCED OPERATION/PLAYBACK
PLAYBACK
ADVANCED OPERATION/PLAYBACK
PLAYBACK MENU 1
To access and use the Menu Screen, see page 31 to 33.
Slideshow settings (page 40)
Specify the settings for playing back files continuously in a “slideshow” format.
In a slideshow of photos, you can set the transition time, transition effects and
BGM.
Changing a setting
1 Select the item you wish to
change, and press the SET
button.
2 Toggle the SET button up or
down to change the setting.
3 Press the SET button.
Begin the slideshow
1 Select [START] and press the SET button.
h Slideshow playback begins.
h To stop slideshow playback, press an operation button. (Playback also
stops if the zoom switch is pushed.)
HINT
BGM for videos?
i When videos are played back in a slideshow, the recorded audio track is
played back; the BGM is not played.
BGM volume?
i Adjust the volume before beginning the slideshow (page 40).
SET
SLIDESHOW
MODE
SLIDES INTERVAL
EFFECT SETUP
MUSIC SELECT
ALL
SHORT
OFF
START
ENTER