L
Lisa MendezAug 22, 2025
How to fix Panasonic Camcorder that won't turn on?
- MmullinsjohnAug 22, 2025
If your Panasonic Camcorder isn't turning on, staying on, or the battery drains quickly, recharge the battery pack or connect the AC adapter.
To Next PageTo Next PageHow to fix Panasonic Camcorder that won't turn on?
If your Panasonic Camcorder isn't turning on, staying on, or the battery drains quickly, recharge the battery pack or connect the AC adapter.
What to do if Panasonic HX-DC2 Camcorder doesn't recognize SD card?
If your Panasonic Camcorder doesn't recognize the SD card, it may be because the card was formatted on a PC. Use the camcorder to format SD cards.
How to fix VIERA Link on Panasonic HX-DC2 Camcorder?
If VIERA Link isn't working with your Panasonic Camcorder, connect it with an optional HDMI micro or mini cable, depending on your model (HX-WA20/HX-WA2 or HX-DC2). Ensure that [VIERA Link] is set to [ON] in the settings. Try turning the unit off and then on again. If the TV input doesn't switch automatically, use the TV remote to switch it manually. Check the VIERA Link setting on the connected device.
Why does my Panasonic Camcorder keep stopping recording?
If your Panasonic Camcorder stops recording unexpectedly, ensure you are using an SD card suitable for motion picture recording. The recordable time might be reduced because of data writing speed deterioration or repeated recording and deletion. Try formatting the SD card or the built-in memory using the unit.
What to do if Panasonic Camcorder displays error message?
If you see the message “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.” on your Panasonic Camcorder, try these steps: First, remove and reinsert the SD card. Then, remove and reinsert the battery. Finally, try a different SD card. If the message still appears, disconnect the power and consult the dealer where you bought the camcorder.
Why is my Panasonic HX-DC2 Camcorder not detected by PC?
If your Panasonic Camcorder is not detected by the PC when connected via USB, re-insert the SD card into the unit and reconnect the supplied USB cable. Try a different USB terminal on your PC. Also, check the operating environment. After restarting the PC and turning on the unit again, reconnect the supplied USB cable.
Why is my Panasonic HX-DC2 battery not charging?
If the battery on your Panasonic Camcorder isn't charging or won't stop charging, check that the plug portion of the AC adapter is not loose or misaligned.
Why is there no sound on my Panasonic Camcorder when connected to TV?
If you're not getting video or audio output from your Panasonic Camcorder when connected to the TV, or the images appear squeezed, ensure you've selected the correct channel on your TV that matches the input used for the connection, referring to your TV's operating instructions. Adjust the [TV ASPECT] setting on the camcorder to match the TV's aspect ratio. If using an HDMI cable, adjust the [HDMI] setting on the camcorder. Also, verify the unit's status and cable connections.
What to do if Panasonic Camcorder is on but not working?
If your Panasonic Camcorder is on but not operating correctly, remove the battery or AC adapter, wait about 1 minute, and then reconnect it. If the issue persists, disconnect the power and consult the dealer from whom you purchased the unit.
General| Sensor type | MOS |
|---|---|
| Total megapixels | 14.4 MP |
| Optical sensor size | 1/2.33 \ |
| Effective megapixels (image) | 11.9 MP |
| Digital zoom | 120 x |
| Optical zoom | 5 x |
| Image stabilizer | Yes |
| Focal length range | 6.8 - 34 mm |
| Interchangeable lens | No |
| Maximum aperture number | 3.7 |
| Minimum aperture number | 3.5 |
| Focal length (35mm film equivalent) | 40 - 240 mm |
| Maximum focal length (35mm film equiv) | 199.5 mm |
| Minimum focal length (35mm film equiv) | 39.9 mm |
| Camera file system | DCF 2.0, Exif 2.2 |
| Camcorder media type | Memory card |
| Compatible memory cards | SD, SDHC, SDXC |
| Internal storage capacity | - GB |
| Focus adjustment | Auto |
| Built-in light | - |
| Shutter speed (photo) | 1/2 - 1/1500 s |
| Shutter speed (video) | 1/30 - 1/10000 s |
| Display diagonal | 3 \ |
| Display resolution (numeric) | 230400 pixels |
| Camcorder type | Handheld camcorder |
| Minimum illumination | 4 lx |
| On Screen Display (OSD) languages | CZE, DEU, DUT, ENG, ESP, FRE, ITA, POL, SWE, TUR |
| Product color | Gray |
| Video resolutions | 640 x 480, 960 x 540, 1280 x 720, 1920 x 1080 pixels |
| Supported video modes | 1080i, 480p, 720p |
| Video formats supported | H.264, MPEG4 |
| Maximum video resolution | 1920 x 1080 pixels |
| Image formats supported | JPG |
| Maximum image resolution | 4352 x 3264 pixels |
| Still image resolution(s) | 640 x 480, 1920 x 1080, 2048 x 1536, 2560 x 1440, 2560 x 1920, 4352 x 2448, 4352 x 3264 |
| Audio formats supported | AAC |
| USB 2.0 ports quantity | 1 |
| Component video (YPbPr/YCbCr) out | 0 |
| Battery voltage | 3.7 V |
| Battery capacity | - mAh |
| Battery life (max) | - h |
| Cables included | USB |
| Bundled software | HD Writer VE2.0 |
| Power consumption (typical) | 4 W |
Weight and Dimensions| Depth | 38.1 mm |
|---|---|
| Width | 86.2 mm |
| Height | 120.8 mm |
| Weight | 180 g |
