- 133 -
∫ Copying still pictures on a Mac
1 Connect this unit to a Mac via the supplied USB
cable.
≥ The USB function selection screen will appear.
2 Select [CARD READER] using the SET button on the
unit, and press the SET button.
≥ The LCD monitor will turn off.
≥ This unit is automatically recognized as an external drive of Mac.
≥ If you select anything other than [CARD READER], remove and then
reconnect the USB cable.
3 Double click on the [CAM_SD] or [CAM_MEM]
displayed on the desktop.
≥ Files are stored in [100CDPFP] folder etc. in the [DCIM] folder.
4 Using a drag-and-drop operation, move the pictures
you want to acquire or the folder storing those
pictures to any different folder on the Mac.
∫ To disconnect USB cable safely
Drag [CAM_SD] or [CAM_MEM] disk icon to the [Trash], and then
disconnect the USB cable.
≥ Do not use any other USB cables except the supplied one. (Operation
is not guaranteed with any other USB cables.)
To Next Page
Loading...
