- 45 -
Select the menu.
Please refer to page 23.
Opening the LCD monitor will switch from Standby Mode to Recording
Standby Status in approximately 0.5 seconds (in Recording Mode only).
≥ When in Quick Start Standby Mode about 48% of the power used
in recording standby mode is being consumed, so the recording
time will be reduced.
≥ Set to Recording Mode. (l 22)
1 Select [QUICK START] with the SET button and press the
SET button.
2 Select [ON] with the SET button and
press the SET button.
3 Close the LCD monitor.
The status indicator A flashes green and the
unit goes into Quick Start standby mode.
4 Open the LCD monitor.
The status indicator A will turn off and switch
to Recording Standby Status.
Basic
Using Option Menu
[MENU]: , or # desired setting
OPTION MENU 1
[CLOCK SET]
[QUICK START]
2
To Next Page
Loading...
