- 77 -
This is for reducing the wind noise coming into the built-in microphones.
≥ This function’s default setting is [ (ON)].
≥ You may not see the full effect depending on the recording conditions.
This setting registers the functions (shortcut functions) performed when
the SET button is tilted up, down, left and right with the recording screen
displayed.
1 Select the destination (up, down, left or right on the SET button)
for the function using the SET button and press the SET button.
[WIND CUT]
[MENU]: # [WIND CUT] # [ (ON)]
[SHORTCUTS]
[MENU]: # [SHORTCUTS]
///:
Functions are registered individually to up, down, left and right of the
SET button.
RECOMMENDED SETTINGS:
Regular functions are automatically registered.
To Next Page
Loading...
