1.6 Making/Answering an Announcement
User Manual 109
To make a conversation with a party in the group's preassigned order
To end a conversation with a specific party
• In this case, the FLASH/RECALL button must be in Flash/Recall mode. For information about
setting the mode of your FLASH/RECALL button, consult your dealer.
PT
Press CONF.
During an announcement
CONF
PT
To end a conversation with a specific party
During a conversation
(DSS)
Press DSS.
To end a conversation with the party who
joined the conversation last
Press TRANSFER.
TRANSFER
To disconnect the party who joined the
conversation last from the broadcast
Press FLASH/RECALL.
FLASH/
RECALL
To Next Page
Loading...
