3.1 Customising Your Phone (Personal Programming)
186 User Manual
Clearing Features
You can clear or change to features as follows:
Features Default Setting
Display Switching Mode Automatic
Hot Line Off
Calling Line Identification Restriction [CLIR] Allow
Calling/Connected Line Identification Presentation [CLIP/COLP] Caller ID assigned on your extension
Preferred Line Assignment—Outgoing Intercom
Preferred Line Assignment—Incoming The longest ringing line
Alternate Receiving—Ring/Voice Ringing (Tone Call)
Parallelled Telephone Paired SLT will ring
Forced Answerback Selection Disable
Live Call Screening Mode Set Hands-free mode
LCS Mode Set [After Answering] Stop recording
Call Waiting Selection—Intercom/Outside Calls Disable (No call/No tone)
Call Waiting Tone Type Selection Tone 1
Absent Message Off
Personal Absent Message Cleared
Call Forwarding [FWD]/Do Not Disturb [DND]—Intercom/Outside
Calls
Off
FWD N/A Timer 15 seconds
Call Pickup Deny Allow
Headset Operation Headset off
Executive Busy Override Deny Allow
Paging Deny Allow
Key Pad Tone Set On
Background Music [BGM] Off
Data Line Security Off
Connected Line Identification Restriction [COLR] Allow
Log-in/Log-out Log-in
Message Waiting Off
Timed Reminder Cleared
To Next Page
Loading...
