Panasonic KV-S1015C User Manual (English)

Other manuals for Panasonic KV-S1015C

Operating Manual64 pages

Specification2 pages

Questions and Answers:

C
cynthiamooreAug 18, 2025
What to do if my Panasonic KV-S1015C Scanner is not recognized by the computer?
- A
  ashlee59Aug 18, 2025
  If your Panasonic Scanner isn't being recognized, it could be due to several reasons: * The scanner might not be connected correctly; ensure the USB cable is properly connected. * The software might not be installed correctly; try uninstalling and reinstalling it. * If you're using a USB hub, it may not be functioning well; connect the scanner directly to the computer. * There might be an issue with the USB cable itself; try using the included USB cable or a certified Hi-speed USB 2.0 cable. * The scanner may have turned off due to inactivity; press the power button to turn it back on.
M
Michael WilliamsAug 20, 2025
Why does my Panasonic KV-S1015C frequently have paper jams?
- S
  Sarah BrooksAug 21, 2025
  Frequent paper jams in your Panasonic Scanner can occur due to: * The document being wrinkled; smooth out the document before scanning. * The rollers being dirty; clean the rollers. * The document is not aligned correctly; realign the document. * Too many pages in the feed tray; remove pages until it's under the limit mark on the document guides.
A
Ann FoxAug 23, 2025
What to do if my Panasonic Scanner is double feeding or stops loading?
- G
  Gary KnightAug 23, 2025
  If your Panasonic Scanner is experiencing double feeding or stopping during loading, it could be due to: * Dirty rollers; clean the rollers. * Worn paper feed or double feed prevention rollers; replace them. * Uneven document height due to curling or folding; flatten the document. * Unsupported or thick paper; use acceptable paper. * Paper that is too short; use acceptable size paper. * Misaligned document; realign the document. * Too many pages loaded; reduce the number of pages.
J
Jeff LopezAug 26, 2025
Why is the scan speed so slow on my Panasonic Scanner?
- W
  wrightmariaAug 26, 2025
  A slow scan speed on your Panasonic Scanner could be because it's connected over a USB 1.1 connection. Try connecting it over USB 2.0 for faster scanning.
C
Charles MarksAug 27, 2025
How to fix a skewed scanned image on my Panasonic Scanner?
- A
  angela84Aug 27, 2025
  A skewed scanned image on your Panasonic Scanner can be caused by: * Document guides not adjusted to the document size, or the document being set slanted; adjust the document guides properly. * Uneven document height due to curling or folding; flatten the document.
J
Jeremy GuzmanAug 30, 2025
How do I remove vertical lines on scanned documents from my Panasonic KV-S1015C?
- C
  Charles HarringtonAug 30, 2025
  Vertical lines on scanned documents from your Panasonic Scanner are likely due to a dirty scanning glass. Clean the scanning glass to resolve this issue.
S
Seth CookSep 1, 2025
Why do dark spots or noise appear on scanned documents from my Panasonic Scanner?
- C
  cory13Sep 1, 2025
  Dark spots or noise on scanned documents from your Panasonic Scanner are often caused by a dirty scanning glass. Cleaning the scanning glass should solve the problem.
N
Noah JohnsonSep 3, 2025
Why is the scanning density uneven on my Panasonic KV-S1015C Scanner?
- M
  Mary WrightSep 3, 2025
  Uneven scanning density on your Panasonic Scanner is usually due to a dirty scanning glass. Try cleaning the scanning glass.
L
Luis SnyderSep 6, 2025
What to do if the Panasonic KV-S1015C Scanner doesn't start scanning when the document is loaded?
- C
  Carolyn NicholsSep 6, 2025
  If your Panasonic Scanner doesn't start scanning when the document is loaded, it could be because: * The document is not loaded properly; ensure you load the document correctly. * The sensor cannot detect the document because the edge is curled; flatten the document before loading.
S
Sara DiazSep 8, 2025
How do I eliminate noise or wave patterns (moire pattern) on scanned images from my Panasonic Scanner?
- M
  Michael WattsSep 8, 2025
  Noise or wave patterns (moire patterns) on scanned images from your Panasonic Scanner can be caused by the scanning resolution settings combined with patterns within the scanned image. Try changing the scanning resolution and scanning again.

Panasonic KV-S1015C Specifications

Scanning Specifications

scanner type	Duplex Sheet Feed Scanning
scanner technology	1-Line CIS (Contact Image Sensor)
scanning speed	Up to 20 ppm / 40 ipm (Binary 200 dpi)
resolution	100 - 600dpi (1dpi step)
optical resolution	300/600dpi
automatic detection	Ultrasonic Double-Feed Detection
image output	Binary, Grayscale, Color, MultiStream (Color & Binary or Gray & Binary)

Document Handling

document size (ADF) minimum	1.9 in. x 2.8 in. (48 mm x 70 mm)
document size (ADF) maximum	8.5 in. x 100 in. (216 mm x 2, 540 mm)
weight/thickness single	11 lbs. - 55 lbs. (40 - 209 g/m²)
automatic document feeder capacity	Up to 50 sheets (20 lbs., 80 g/m²), 3 hard cards (ISO 7810 ID-1)

Power

power requirement	AC 100 - 120 V 50/60 Hz, AC 200 - 240 V 50/60 Hz
power consumption scanning mode	17 W or less
power consumption idle mode	4.5 W or less
power consumption sleep mode	1.6 W or less
power consumption power off mode	0.3 W or less

Operating Environment

operating temperature	50 °F - 95 °F (10 °C - 35 °C)
operating humidity	20 % RH - 80 % RH
storage temperature	32 °F - 104 °F (0 °C - 40 °C)
storage humidity	10 % RH - 80 % RH

Weight and Dimensions