What causes noise or wave patterns (moire pattern) on the scanned image from my Panasonic KV-S1028Y Scanner?
Noise or wave patterns (moire pattern) on the scanned image can be caused by the scanning resolution settings, combined with patterns within the scanned image. Change the scanning resolution or turn the Moire Reduction function on, and perform scanning again.
Why does my Panasonic KV-S1028Y Scanner feed documents in bunches?
If the documents are not fed one at a time, but in bunches, the scanning method is likely set to manual. Select automatic scanning using the manual feed selector.
Why does the color of the scanned document from my Panasonic KV-S1028Y look extremely different?
The color of the scanned document may differ significantly from the original due to: * The settings of the computer monitor do not accurately reflect the color of the document: Adjust the computer monitor settings. * Depending on the documents scanned, the color of documents may not be scanned properly. For example, the color of a highlighter pen may be scanned lighter than it appears: Setting the value for [Chroma] higher in the scanning conditions may solve this problem.
What to do if my Panasonic KV-S1028Y scan speed is slow?
If your Panasonic Scanner's scan speed is slow, it might be connected via USB 1.1. Try connecting it via USB 2.0 or USB 3.0 for faster scanning.
Why are documents rolled up in the exit tray area of my Panasonic Scanner?
If scanned documents are rolled up in the exit tray area when using the exit guides, it's likely because the documents are curved or curled. Scan the documents with the exit guides folded.
What to do if the LED on my Panasonic KV-S1028Y Scanner does not light up?
If the green LED does not light when the unit’s power is turned on, it is likely that the power cord is not plugged in. Insert the power plug firmly.
Why is the scanning density uneven on my Panasonic Scanner?
Uneven scanning density is often caused by dirty scanning glasses. Clean the conveyor and scanning glasses. The problem may also be resolved by using "Vertical Line Reduction" in User Utility.
Why do vertical streaks appear on scanned documents from my Panasonic Scanner?
Vertical streaks typically appear because the scanning glasses are dirty. Clean the conveyor and scanning glasses. The problem may also be resolved by using "Vertical Line Reduction" in User Utility.
Why do dark spots appear on scanned documents from my Panasonic KV-S1028Y Scanner?
Dark spots or noise on scanned documents are often due to dirty scanning glasses. Clean the conveyor and scanning glasses.
Why are scanned images from my Panasonic KV-S1028Y Scanner skewed?
A skewed scanned image can be caused by: * The document guides are not adjusted to the size of the document to be scanned, or the document to be scanned is set slanted on the feed tray: Adjust the document guides properly to the size of the document to be scanned. * Right and left sides of the document to be scanned are not the same in height because of curling or folding: Flatten the document and load it again after reducing the number of sheets.
To Next Page
General