A
Alison ChanJul 29, 2025
What to do if my Panasonic KV-S1065C Scanner is not recognized by the computer?
- BBrendan DavidsonJul 30, 2025
If your Panasonic Scanner isn't being recognized, there are several potential causes: 1. Ensure the USB cable is correctly connected directly to your computer, bypassing any USB hubs. 2. Verify that the USB interface of your computer is properly installed using the device manager’s property. 3. Try using the included USB cable or a certified Hi-speed USB 2.0 cable. 4. The scanner might have turned off due to inactivity; press the power key to turn it back on. 5. If the software isn't installed correctly, uninstall it from your computer and then reinstall it.