Panasonic KV-S8127 - Page 16

6. Put your fingers on the indents ( ) of the double feed prevention roller cover and pull it upwards to
remove it.
1
7. Install the new double feed prevention roller
.
i. Press the lever (
) to the left side, and install the right hole ( ) of the roller onto the shaft ( ).
1
3
2
ii. Align the left side roller's hole ( ) with the shaft ( ).
1
5
4
iii. Return the lever ( ) to the original position, and insert the shaft into the hole.
4.3 Installing the Unit
16