Panasonic KX-A142EXM

adaptor, and remove pins on PCB.
Then close the cabinet. The base pin returns to the default (0000)
and you can register a handset to the base using the base PIN
(0000).
6.4. Reset
6.4.1. Base Unit
If the base unit is reset, the Caller ID list will clear.
- To exit the operation, press any time.
- *1: The factory preset is 0000.
Base Unit Initial Settings
Function Initial Setting Remarks (selectable
options)
Ringer Mode All Handsets All Handsets/Specific
Handset
No.
Number of Rings 3 Up to 6 rings
Flash/Earth Flash Flash/Earth
Flash Timing 600 msec 600/100/300 msec
Pause Timing 3 seconds 3 seconds/5 seconds
Call Restricted Handsets All Clear Each Handset can be set
indivisually.
Call Restriction Numbers All Clear Up to 10 numbers (up to
8
digits)
4-Digit Base Unit PIN 0000 -
Dialling Mode Tone Tone/Pulse
6.4.2. Handset
You can reset all of the handset settings to their initial settings.
12
www.freeservicemanuals.info
1/2/2015
Digitized in Heiloo, Holland