Panasonic KX-FLB882CX - Page 60

9. Programmable Features
60
Setting the ring pattern for fax
(Distinctive Ring feature)
{#}{4}{3}{1}
{1} “A”
{2} “B”
{3} “C”
{4} “D”
{5} “B-D” (default)
Note:
L This feature may not be available depending on feature #114 setting (page
3).
L See page 53 for details.
Setting auto reduction
feature
{#}{4}{3}{2}
To receive a fax document that is longer than your recording paper.
{0} “OFF”: The unit will print the original size.
{1} “ON” (default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
{#}{4}{3}{4}
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
L The fax activation code must be different from the code that you
programmed on the answering machine.
{0} “OFF”
{1} “ON” (default)
1. {MENU} i {#}{4}{3}{4}
2. Press {1} to select “ON”. i {SET}
3. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is “;#9”.
L Do not enter “0000”.
4. {SET} i {MENU}
Note:
L If feature #114 is set to “HONG KONG”, the default fax activation code is
“;;;9”.
Changing the silent fax
recognition ring setting
{#}{4}{3}{6}
To change the number of times the unit rings while in TEL/FAX mode.
{3} “3” (default)
{4} “4”
{5} “5”
{6} “6”
{7} “7”
{8} “8”
{9} “9”
Note:
L This feature may not be available depending on feature #114 setting (page
3).
L See page 46 for details.
Setting the memory reception
alert
{#}{4}{3}{7}
To alert you with a beeping sound when a received fax document is stored into
memory due to some existing problem.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you solve the printing problem and make
sure the unit is supplied with enough paper to print the stored document.
Feature/Code Selection
FLB882CX-PFQX2773ZB-OI-en.book Page 60 Friday, October 5, 2007 11:45 AM