13. Cleaning
89
6 Close the document cover (1).
7 Re-connect the power cord.
If the document cover comes off from the unit
1. Attach the hinges (1) to the document cover (2).
L Make sure that the inserted direction is correct.
Otherwise, the hinges cannot be inserted into the
slots in step 3.
2. Lay down the hinges (1).
3. Insert the hinges (1) into the slots (2) on the unit.
4. Close the document cover.
1
1
2
1
1
2
FLB882CX-PFQX2773ZB-OI-en.book Page 89 Friday, October 5, 2007 11:45 AM
To Next Page
Loading...
