Panasonic KX-FLB882CX - Page 90

13. Cleaning
90
13.1.2 Lower glass
1
Disconnect the power cord.
2 Lift the top cover release lever (1) and open the top
cover (2).
Important:
L Close the manual input tray (3) before
opening the top cover.
Note:
L Do not touch the transfer roller (5).
3 Remove the drum and toner unit (1) by holding the
tabs.
4 Clean the lower glass (1) with a soft and dry cloth.
5 Reinstall the drum and toner unit (1) by holding the
tabs.
L Make sure that the triangles (2) match to install
the drum and toner unit correctly.
Caution:
The fuser unit (4) gets hot. Do not touch
it.
1
4
2
5
3
1
1
1
2
FLB882CX-PFQX2773ZB-OI-en.book Page 90 Friday, October 5, 2007 11:45 AM