7. Answering Machine
47
L Your mailbox greeting message will be
erased.
4. Press {MENU}.
7.7 Listening to recorded
mailbox messages
L Keep the front cover page open for button
locations.
1 Press {>} 2 times.
2 Press {A} or {B} repeatedly to display the
desired mailbox number.
3 Press {PLAY MESSAGES}.
If you have programmed your mailbox
password, enter it.
L Only the new recorded messages will be
played.
L If there are no new messages, the unit
will play back all the recorded messages.
4 Press {STOP} to end the operation.
Note:
L See the following topics on page 43 for
details on features that can be used during
playback.
– To repeat a message
– To skip a message
– To stop playback temporarily
– To change the playback speed
– To erase a specific message
To record a memo message into a mailbox
1. Press {>} 2 times.
2. Press {A} or {B} repeatedly to display the
desired mailbox number.
3. Press {RECORD}.
L A long beep will sound.
4. Speak clearly about 20 cm (8 inches) away
from the microphone.
5. When finished recording, press {STOP}.
To erase all messages in a mailbox
1. Press {>} 2 times.
2. Press {A} or {B} repeatedly to display the
desired mailbox number.
3. Press {ERASE}.
L To cancel erasing, press {STOP}.
4. Press {SET}.
FP145.book Page 47 Thursday, January 15, 2004 10:46 AM
To Next Page
Loading...
