Panasonic KX-FP145

2. Preparation
18
For Fax Advantage assistance, call 1-800-435-7329.
2.5 Case 3: TEL ONLY
2.5.1 Your situation
You wish to use the fax machine and an
extension telephone in a different room. Most
incoming calls are phone calls and the fax
machine is seldom used for fax reception.
2.5.2 How to setup
1 Press {MENU}.
2 Press {#} then {0}{0}.
QUICK SETUP
PRESS SET
3 Press {SET}.
PRINT SETUP?
YES:SET/NO:STOP
4 Press {SET} again to print the Quick Setup
Guide.
L If you do not wish to print it, press
{STOP}.
5 Press {A} or {B} repeatedly to display the
following.
SELECT A SETUP
=TEL ONLY [±]
6 Press {SET}.
L The {AUTO ANSWER} indicator turns
OFF.
7 Press {MENU}.
2.5.3 How to receive calls
You can receive a fax with the fax machine or an
extension telephone.
With the fax machine
1. Press {DIGITAL SP-PHONE} or lift the
handset to answer the call.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {FAX/START}.
3. Replace the handset if using it.
L The fax machine will start fax reception.
With an extension telephone
1. When the extension telephone rings, lift the
handset of the extension telephone.
2. When:
– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press {*}{#}{9} (default fax activation code)
firmly.
3. Replace the handset.
L The fax machine will start fax reception.
Note:
L To receive fax documents using the
extension telephone, you must set the
remote fax activation to ON (feature #41 on
page 53) beforehand. The default setting is
“ON”.
{STOP}
{FAX/START}
{SET}
{MENU}
{A}{B}
{DIGITAL SP-PHONE}
Off
FP145.book Page 18 Thursday, January 15, 2004 10:46 AM