Panasonic KX-FP701FX

6. Programmable Features
33
Setting the memory
reception alert
{#}{4}{4} To alert you with a beeping sound when a received fax document
is stored into memory due to some existing problem.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you clear the printing
problem and make sure the unit is supplied with enough paper
to print the stored document.
Setting friendly
reception
{#}{4}{6} To receive a fax automatically when you answer a call and hear a
fax calling tone (slow beep).
{0} “OFF”: You have to press {FAX START} for fax reception.
{1} “ON” (default): You do not have to press {FAX START} for fax
reception.
Selecting the language {#}{4}{8} The display will be in the selected language.
{1} “ENGLISH” (default): English is used.
{2} “BULGARIAN”: Bulgarian is used.
{3} “CROATIAN”: Croatian is used.
{4} “SERBIAN”: Serbian is used
{5} “ALBANIAN”: Albanian is used.
{6} “SLOVENE”: Slovene is used.
1. {MENU} i {#}{4}{8}
2. Press {1} to {6} to select the desired language. i {SET}
i {MENU}
Setting the auto
disconnection
{#}{4}{9} To answer a call with an extension telephone in TEL/FAX mode
(page 24), activate this feature and program the code.
{0} “OFF”
{1} “ON” (default)
1. {MENU} i {#}{4}{9}
2. Press {1} to select “ON”. i {SET}
3. Enter your code from 2 to 4 digits, using 0-9 and {*}.
L The default code is “;0”.
4. {SET} i {MENU}
Setting the scan
contrast
{#}{5}{8} To send or copy a document with faint or dark writing, set this
feature before transmission or copying.
{1} “NORMAL” (default): Used for normal writing.
{2} “LIGHT”: Used for dark writing.
{3} “DARKER”: Used for faint writing.
Setting the Error
Correction Mode (ECM)
{#}{6}{8} This feature is available when the transmitting / receiving fax
machines are ECM compatible.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): If there is an error during fax transmission /
reception, the fax machine will support the communication.
Note:
L You cannot change the setting when received documents are
in memory.
Feature Feature code Selection
FP701FX-PFQX2792ZA-en.book Page 33 Friday, July 13, 2007 3:34 PM