Panasonic KX-FP701FX

6. Programmable Features
34
Setting recall time {#}{7}{2} The recall time depends on your telephone exchange or host
PBX.
{1} “900ms”
{2} “700ms”
{3} “600ms” (default)
{4} “400ms”
{5} “300ms”
{6} “250ms”
{7} “200ms”
{8} “160ms”
{9} “110ms”
{*} “100ms”
{0} “90ms”
{#} “80ms”
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
Changing the receiving
mode in the manual
answer setting
{#}{7}{3}{1} “TEL” (default): Telephone mode (page 24)
{2} “TEL/FAX”: Telephone/Fax mode (page 24)
Setting the connecting
tone
{#}{7}{6} If you often have trouble when sending faxes, this feature allows
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party’s machine.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may
not be a fax machine or may have run out of paper. Check with
the other party.
L The connecting tone volume cannot be adjusted.
Changing the TEL/FAX
delayed ring count
{#}{7}{8} If you use an extension telephone in TEL/FAX mode, select the
desired number of times the extension telephone rings before the
unit answers the call.
{1} “1”
{2} “2” (default)
{3} “3”
{4} “4”
{5} “5”
{6} “6”
{7} “7”
{8} “8”
{9} “9”
Feature Feature code Selection
FP701FX-PFQX2792ZA-en.book Page 34 Friday, July 13, 2007 3:34 PM