Panasonic KX-HTS32 - Surge Protector Installation

PIL Reference
2.3.1 PBX Configuration—[2-1] Extension—Port—SIP Extension
3.3 Memory Dialing Features
3.3.1 System Speed Dial
Description
An extension user can make calls using abbreviated dialing for frequently dialed numbers which are stored
in the PBX system data.
Operation
Enter the System Speed Dialing feature number and the System Speed Dialing number while hearing a dial
tone.
(Refer to 2.1.1 Feature Number Lists for User)
Conditions
Conditions Note
A maximum of 200 System Speed Dialing numbers (e.g., telephone
numbers, feature numbers) can be programmed in Web
Maintenance Console.
Making System Speed Dialing calls can be restricted by TRS
settings.
Refer to 3.4.1 Toll Restriction
(TRS)
It is not possible to register a Quick Dial number as the dialing
destination of System Speed Dialing.
Refer to 3.3.2 Quick Dial
It is not possible to call a phone number which is set as "Disconnect"
in CLI destination by using System Speed Dial (Possible using
ordinary dialing).
Refer to 3.1.1 Calling Line
Identification (CLI) Distribution &
Call Block
Extension number and feature number can be registered in System
Speed Dial.
The System Speed Dial data can be transferred to the KX-HDV230
terminal and used as the phonebook of the terminal.
Refer to the KX-HDV series
manual for operations of the
terminal.
PIL Reference
2.3.1 PBX Configuration—[2-1] Extension—Port
2.6 PBX Configuration—[5] System Speed Dialing—System Speed Dialing
3.3.2 Quick Dial
Description
An extension user can access an extension or feature by simply dialing a 1-2 digit Quick Dialing number.
Operation
Enter a 1-2 digit Quick Dialing number, while hearing a dial tone.
3.3 Memory Dialing Features
Feature Manual 43