2.2 Turning the power switch ON
Turn the power switch to the ON position (A).
2.3 Dialling mode
If you cannot dial (page 39), change this setting
according to your telephone line service.
1 MMENUN
2 Press MBNM1NM2NM0N to display “DIALLING MODE”.
3 Press M1N or M2N to select the desired setting.
M1N “PULSE”: For rotary/pulse dial service.
M2N “TONE” (default): For tone dial service.
4 MSETN
5 Press MMENUN to exit.
18
2. Preparation
To Next Page
Loading...
