Panasonic KX-MB2090CX

9.1 Programming from the unit
MSETN
MMENUN
1 MMENUN
2 Press MBN and the 3-digit code (page 55 to page 71).
3 Press the appropriate selection to display the desired setting.
R This step will vary depending on the feature.
4 MSETN
5 Press MMENUN to exit.
9.1.1 Basic features
Feature/Code Selection
Setting the date and time
MBNM1NM0NM1N
Enter the date and time using the dial keypad. See page 21 for details.
Setting your logo
MBNM1NM0NM2N
Enter your logo using the dial keypad. See page 22 for details.
Setting your fax number
MBNM1NM0NM3N
Enter your fax number using the dial keypad. See page 22 for details.
Selecting the location where
you use
MBNM1NM1NM4N
(KX-MB2085CX/
KX-MB2090CX only)
This setting must match your location.
M1N “MIDDLE EAST” (default): To use in Middle East.
M2N “ASIA”: To use in Asia (except Middle East).
M3N “TUNISIA”: To use in Tunisia.
M4N “AFRICA”: To use in Africa (except Tunisia).
Setting the dialling mode
MBNM1NM2NM0N
M1N “PULSE”
M2N “TONE” (default)
See page 18 for details.
55
9. . Programmable Features
9. Programmable Features