2.8 Your logo
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
1 MMENUN A MBNM1NM0NM2N A MSETN
2 Enter your logo, up to 30 characters (see page 76
for character entry). A MSETN
3 Press MMENUN to exit.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
character, and make the correction.
R To erase all characters, press and hold MSTOPN.
2.9 Your fax number
You can program your fax number so that it appears on
the top of each page sent.
MSTOPN
MMENUN
MFNMENMSETN
MFLASHN
1 MMENUN A MBNM1NM0NM3N A MSETN
2 Enter your fax number, up to 20 digits.
R To enter a “+”, press MGN.
R To enter a space, press MBN.
R To enter a hyphen, press MFLASHN.
R To erase a number, press MSTOPN.
3 MSETN
4 Press MMENUN to exit.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.
R To erase all numbers, press and hold MSTOPN.
22
2. Preparation
To Next Page
Loading...
