3 Enter the fax number using one-touch dial or
phonebook.
4 MSTARTN
6.4 Broadcast transmission
You can send the same document to multiple parties (up
to 20). To use this feature, store the fax numbers into
broadcast memory as follows.
Broadcast: Store items using one-touch dial or
phonebook (page 40).
Manual broadcast: Store items using one-touch dial or
phonebook (page 40). You can also use the dial keypad
to store items manually.
Your programmed items will remain in the broadcast
memory, allowing frequent re-use.
R The broadcast function utilises station 1-2. The
one-touch dial function will be cancelled.
R Make sure that the MFAXN light is ON.
6.4.1 Programming items into the broadcast
memory
1 Press MMENUN repeatedly to display “PHONEBOOK
SET”.
2 Select the desired broadcast key.
For BROADCAST:
1. MBROADCASTN
2. Press MCN or MDN repeatedly to select
“BROADCAST”.
For MANUAL BROADCAST:
1. MMANUAL BROADN
2. Press MCN or MDN repeatedly to select “MANUAL
BROAD”.
3 MSETN
4 Program items.
Using station 1-3:
Press the desired station key.
Using station 4-6:
Press MLOWERN, then press the desired station key.
Using phonebook:
Press MCN or MDN repeatedly to display the desired
item. A MSETN
Using the dial keypad (only for manual broad):
Enter the fax number. A MSETN
R The number in brackets indicates the number of
registered items.
R To program other items, repeat this step (up to 20
items).
R If you have programmed the wrong item, press
MSTOPN to erase the item.
5 MSETN
R To program another broadcast key, repeat steps
2 to 5.
6 MSTOPN
42
6. Fax
To Next Page
Loading...
