2 Press MCN or MDN repeatedly to display the desired
item. A MMENUN A MGN
3 Edit the name if necessary. A MSETN
4 Edit the telephone number if necessary. A MSETN
A MSTOPN
6.2.4 Erasing a stored item
1 MPHONEBOOKN
2 Press MCN or MDN repeatedly to display the desired
item. A MMENUN A MBN
R To cancel erasing, press MSTOPN.
3 MSETN A MSTOPN
6.3 Sending a fax using one-touch
dial feature and phonebook
Before using this feature, store the desired names and
telephone numbers into the one-touch dial feature and
phonebook (page 40).
R Make sure that the MFAXN light is ON.
6.3.1 Using the scanner glass
1 Set the original (page 19).
2 If necessary, change the resolution (page 39) and the
contrast (page 39).
3 Enter the fax number.
Using station 1-3:
Press the desired station key.
Using station 4-6:
Press MLOWERN, then press the desired station key.
Using phonebook:
Press MPHONEBOOKN, then press MCN or MDN
repeatedly to display the desired item.
4 Press MSTARTN to scan the document into memory.
R Wait until “SCAN:PRESS SET” “SEND:PRESS
START” is displayed.
R To send a single page, go to step 6.
R To send multiple pages, go to the next step.
5 Place the next page. A MSETN
R To send more pages, repeat this step.
6 MSTARTN
To search for a name by initial
Example: “LISA”
1. MPHONEBOOKN
2. Press MCN or MDN to initiate the phonebook.
3. Press M5N repeatedly to display any name with the
initial “L” (see page 76 for character entry).
R To search for symbols, press MGN.
4. Press MCN or MDN repeatedly to display “LISA”.
R To stop the search, press MSTOPN.
Fax auto redial
If the line is busy or if there is no answer, the unit will
automatically redial the number 2 or more times.
Note:
R To stop sending, see page 78.
6.3.2 Using the automatic document feeder
1 Set the original (page 20).
2 If necessary, change the resolution (page 39) and the
contrast (page 39).
41
6. Fax
To Next Page
Loading...
