Panasonic KX-MB2090CX

Feature/Code Selection
Setting the ring pattern for fax
(Distinctive Ring feature)
MBNM4NM3NM1N
Important:
R This feature is not available for KX-MB2085ML/KX-MB2090ML.
R This feature is not available when “TUNISIA” is selected in feature
#114 on page 55 (KX-MB2085CX/KX-MB2090CX only).
M1N “A”
M2N “B”
M3N “C”
M4N “D”
M5N “B-D” (default)
See page 54 for details.
Setting auto reduction
feature
MBNM4NM3NM2N
To receive a fax document that is longer than your recording paper.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): The unit will fit received documents onto your recording
paper.
Changing the fax activation
code
MBNM4NM3NM4N
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
Important:
R The fax activation code must be different from the code that you
programmed on the answering machine.
M0N “OFF”
M1N “ON” (default)
1. MMENUN A MBNM4NM3NM4N
2. Press M1N to select “ON”. A MSETN
3. Enter your code from 2 to 4 digits, using 0-9, MGN and MBN.
R The default code is “H#9”.
R Do not enter “0000”.
4. MSETN A MMENUN
Setting the auto
disconnection
MBNM4NM3NM5N
To answer a call with an extension telephone in TEL/FAX mode (page 47),
activate this feature and program the code.
M0N “OFF”
M1N “ON” (default)
1. MMENUN A MBNM4NM3NM5N
2. Press M1N to select “ON”. A MSETN
3. Enter your code from 2 to 4 digits, using 0-9 and MGN.
R The default code is “H0”.
4. MSETN A MMENUN
Changing the silent fax
recognition ring count
MBNM4NM3NM6N
To change the number of times the unit rings while in TEL/FAX mode.
M3N “3” (default)
M4N “4”
M5N “5”
M6N “6”
M7N “7”
M8N “8”
M9N “9”
Note:
R See page 47 for details.
63
9. Programmable Features