Panasonic KX-MB2090CX

Feature/Code Selection
Setting the fax to email
address
MBNM4NM5NM2N
(KX-MB2090 only)
If you wish to transfer a received fax document to desired email address,
activate this feature.
M0N “OFF” (default): Deactivates this feature.
M1N “ON”: If you set the email destinations beforehand (page 73), the received
fax document will be automatically transferred as an email attachment to the
desired address.
Erasing all received fax
memory
MBNM4NM5NM8N
M0N “NO” (default)
M1N “YES”
R Disconnect the following cables before activating this feature.
– Telephone line cord
– USB cable
– LAN cable (KX-MB2090 only)
To erase all received fax:
1. MMENUN A MBNM4NM5NM8N
2. Press M1N to select “YES”. A MSETN A MSETN A MMENUN
Resetting fax features to their
default settings
MBNM4NM5NM9N
M0N “NO” (default)
M1N “YES”
To reset the fax features:
1. MMENUN A MBNM4NM5NM9N
2. Press M1N to select “YES”. A MSETN A MSETN A MMENUN
Note:
R If you select “YES”, the unit will automatically print out any received fax
documents that have been stored into memory:
– PC fax setting (feature #442 on page 64).
– Fax preview (feature #448 on page 51) (KX-MB2090 only).
65
9. Programmable Features