What if my proprietary Panasonic Telephone does not have a feature button?
If your proprietary Panasonic Telephone does not have a feature button, it may be because some models do not have the feature button. Change a flexible button to the desired button.
Why the parallelled single line Panasonic Telephones do not ring?
If the parallelled single line Panasonic Telephones do not ring, it may be because "No ring" is selected. Change the setting to ring.
What to do if IP-PTs/SIP phones do not operate on my Panasonic KX-NS300?
If your IP-PTs/SIP phones are not operating with your Panasonic PBX, it could be due to several reasons: * A malfunctioning DSP card: Replace the card. * A malfunctioning motherboard: Replace the motherboard after turning off the PBX. * Insufficient activation keys: Purchase additional activation key codes from a certified dealer. * The IP-PT/SIP phone is not registered: Register the phone. * The IP-PT/SIP phone malfunction: Replace the phone. * Poor connection: Ensure an 8-pin twisted pair cable is used, CAT 5/CAT 5e cables are not longer than 100m, and a straight cable is used for connection to a switching hub. * Network malfunction: Ensure all network devices are on and the IP-PT/SIP phone isn't blocked by a firewall or other network devices.
How to fix Panasonic Telephone that does not work properly?
If your Panasonic Telephone is not working properly, first confirm with your manager that your settings are correct. If the problem persists, consult your dealer.
What to do if I cannot remember the feature numbers on my Panasonic Telephone?
If you cannot remember the feature numbers on your Panasonic Telephone, it may be because they have been changed from the default values. In that case, ask your dealer to change the feature numbers for easier use.
What to do if I forgot the password for my Panasonic Telephone?
If you forgot the password for your Panasonic Telephone, ask your manager to assist you.
Why I cannot send a call waiting tone to the dialled extension on my Panasonic Telephone?
If you cannot send a call waiting tone to the dialled extension on your Panasonic Telephone, it could be because the other party has not set the Call Waiting feature or the other party has set Data Line Security.
What to do if the background music started suddenly on my Panasonic Telephone?
If the background music started suddenly on your Panasonic Telephone, turn off the music.
What to do if none of the operations work when using a proprietary Panasonic Telephone?
If none of the operations work when using a proprietary Panasonic Telephone, even after following the manual instructions, it may be because the Intercom line was not seized. If the setting has been changed, press the INTERCOM or PDN button after going off-hook and follow the instructions.
Why is a reorder tone audible or "Restricted" displayed on my Panasonic Telephone?
A reorder tone or the display of "Restricted" on your Panasonic Telephone could be due to several reasons. First, the telephone might be locked, so try unlocking it. Second, toll restriction might be activated, in which case you should consult your manager or dealer. Finally, an account code might be required.
General| System Type | Hybrid IP-PBX |
|---|---|
| Built-in Analog Extensions | 2 |
| Power Supply | AC 100-240 V, 50/60 Hz |
| IP Terminals Supported | Yes |
| Analog Terminals Supported | Yes |
| Digital Terminals Supported | Yes |
| Built-in Voicemail | Yes |
| Built-in Conference Bridge | Yes |
| Dimensions | 430 mm x 88 mm x 367 mm |
| Networking | SIP, H.323 |
| Built-in VoIP Channels | None (Requires optional DSP card) |
To Next Page