Panasonic KX-NS700 - Page 218

KX-NT265 (Software version 2.00 or later only)
To configure the port number of PTAP Ports
To configure the port number of DHCP Ports
To configure the port number of FTP Ports
To start programming
Press PROGRAM while
"Searching" is displayed.
Press VOLUME to
select "IP Port".
Press SP-PHONE. Press SP-PHONE.
To end programming
Press STORE.
Press HOLD to return
to the Menu screen.
HOLD
Press VOLUME to
select "PTAP Server".
Press SP-PHONE. Press SP-PHONE.
7678
Password
1024 – 65535
Port No.
Press VOLUME to
select "PTAP Client".
Press SP-PHONE. Press SP-PHONE.
1024 – 65535
Port No.
Press VOLUME to
select "DHCP Server".
Press SP-PHONE. Press SP-PHONE.
67, 1024 – 65535
Port No.
Press VOLUME to
select "DHCP Client".
Press SP-PHONE. Press SP-PHONE.
68, 1024 – 65535
Port No.
Press VOLUME to
select "FTP Server Ctrl".
Press SP-PHONE. Press SP-PHONE.
21, 1024 – 65535
Port No.
Press VOLUME to
select "FTP Client Ctrl".
Press SP-PHONE. Press SP-PHONE.
1024 – 65535
Port No.
Press VOLUME to
select "FTP Client Data".
Press SP-PHONE. Press SP-PHONE.
1024 – 65535
Port No.
The IP-PT will reboot
and can then be
registered to the PBX.
218 Installation Manual Document Version 2016-03
5.7.5 Configuration of IP Ports