25
System Programming
Day/Night Starting Time
Description
Sets the starting time when automatic day/night mode is programmed in the “#70 Day/
Night Switching Mode” program.
Input Format
Explanation
• [A]= 1: Day start time / 2: Night start time • [BB]= Hour: 00-23
• [CC]=Minute: 00-59
Default Day– 9:00 Night–17:00
System Data Clear
Description
Allows the system to re-initialize the system-programmed data. The features mentioned in
“Station Feature Clear” are also re-initialized. See page 12 of the User Manual. When all
the programmed data is cleared, the system will restart with the default setting.
Input Format
Day/Night Switching Mode
Description
Assigns automatic or manual day/night mode.
Condition
• If automatic switching mode is assigned, day/night mode is switched at the time
programmed in “#71 Day/Night Starting Time”.
Input Format
Explanation
• [A]= 0: MANUALE/ 1: AUTO
Default 0: MANUALE
7
[A]
0
7
[A] [BB] [CC]
1
9
9
To Next Page
Loading...
