8.10. Check Handset Transmission
Cross Reference:
Signal Route ().
8.11. Check Handset Reception
Cross Reference:
Signal Route ().
NOTE:
When checking the RF UNIT, Refer to Check the RF Unit ()
8.12. Check Call ID
Cross Reference:
Telephone Line Interface ().
Calling Line Identification (Caller ID)/Call Waiting Caller ID ().
Note:
- Make sure the format of the Caller ID or Call Waiting Caller ID
service of the Telephone company that the customer subscribed to.
- Also we recommend to confirm that the customer is really a
subscriber of the service.
9. TEST MODE
9.1. Test mode flow chart for Base Unit
39