Panasonic KX-TC1743B

Ref. No. Part No. Part Name & Description Remarks
A1 KX-TCA1-G AC ADAPTOR
S
A2 PQJA10075Z TEL CORD
A3 PQKE10130Z1 BELT CLIP (for KX-TC1743B) S
A3 PQKE10130Z4 BELT CLIP (for KX-TC1743F) S
A3 PQKE10130Z5 BELT CLIP (for KX-TC1743G) S
A3 PQKE10130Z2 BELT CLIP (for KX-TC1743W) S
A3 PQKE10130Z3 BELT CLIP (for KX-TC1743PW) S
A4 PQKL10035Z1 WALL MOUNT ADAPTOR (for KX-TC1743B) (for KX-TC1743F) (for KX
-TC1743G)
S
A4 PQKL10035Z2 WALL MOUNT ADAPTOR (for KX-TC1743W) (for KX-TC1743PW) S
A5 PQQW12441Z QUICK GUIDE (for English)
A6 PQQW12442Z QUICK GUIDE (for Spanish)
A7 PQQX13054Z INSTRUCTION BOOK (for KX-TC1743B) (for KX-TC1743W)
A7 PQQX13054Y INSTRUCTION BOOK (for KX-TC1743F) (for KX-TC1743G) (for KX-
TC1743PW)
P1 PQPP170Y PROTECTION COVER (for Base Unit)
P2 XZB10X35A02 PROTECTION COVER (for Handset)
P3 PQPK13405Z CARTON BOX (for KX-TC1743B)
P3 PQPK13511Z CARTON BOX (for KX-TC1743F)
P3 PQPK13512Z CARTON BOX (for KX-TC1743G)
P3 PQPK13495Z CARTON BOX (for KX-TC1743W)
P3 PQPK13510Z CARTON BOX (for KX-TC1743PW)
25. FOR SCHEMATIC DIAGRAM
25.1. Base Unit (SCHEMATIC DIAGRAM (Base Unit))
Notes:
1. DC voltage measurements are taken with voltmeter from the
negative voltage line.
This schematic diagram may be modified at any time with the development of new technology.
25.2. Handset (SCHEMATIC DIAGRAM (Handset))
Notes:
1. DC voltage measurements are taken with an oscilloscope or a
tester with a ground.
2. The schematic diagrams and circuit board may be modified at any
time with the development of new technology.
80