Panasonic KX-TCD290E - Display Setup; Call Options

Handset Settings
28
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
6 Press the desired category numbers, then
press
{j /OK } .
L The selected category number will flash.
L To cancel a selected category number,
press the number again. The number will
stop flashing.
7 Press {ih} .
Note:
L If a call is received from one of the categories
set to bypass night mode, only the handset will
ring.
Display setup
Selecting the standby mode display
“ Base Number ” : The current base unit number
is displayed.
“ Handset Number ” : The current handset
number is displayed.
“ Off ” : Only the current date and time are
displayed.
1 Press {j /OK } .
2 Select “ Handset Setup ” , then press {>} .
3 Select “ Display Setup ” , then press {>} .
4 Select “ Standby Display ” , then press
{>} .
5 Select the desired setting, then press {>} .
6 Press {ih} .
Note:
L If “ Base Number ” is selected and the current
base unit number is 2,
“ -2- ” is displayed.
L If “ Handset Number ” is selected and the
current handset number is 2,
“ [2] ” is
displayed.
Changing the display language
1
Press {j /OK } .
2 Select “ Handset Setup ” , then press {>} .
3 Select “ Display Setup ” , then press {>} .
4 Select “ Select Language ” , then press
{>} .
5 Select the desired language, then press {>} .
6 Press {ih} .
Note:
L If you select a language you cannot read,
press
{ih} , {j /OK } , press {e} 2 times,
press {>} , press {v} 2 times, press {>} ,
press {v} , press {>} , select the desired
language, then press
{>} . Press {ih} .
Changing the display contrast
1
Press {j /OK } .
2 Select “ Handset Setup ” , then press {>} .
3 Select “ Display Setup ” , then press {>} .
4 Select “ Contrast ” , then press {>} .
5 Press {e} or {v} repeatedly to select the
desired contrast, then press {>} .
6 Press {ih} .
Call options
Turning call bar on/off
This feature prohibits making outside calls. When
call bar is turned on, only intercom calls and calls
to emergency numbers (page 33) can be made.
1 Press {j /OK } .
2 Select “ Handset Setup ” , then press {>} .
3 Select “ Call Options ” , then press {>} .
4 Select “ Call Bar ” , then press {>} .
5 Enter “ 0000 ” (default handset PIN).
L If you changed the PIN, enter it (page 29).